A self-made shower stall will not only make your stay more comfortable, but will also save you money. Home-made boxing will save on the cost of attracting third-party and not always conscientious workers. Equally important is the moral satisfaction received from the results of one's labor. Is it true?
We will tell you how to build a shower cabin in a private house with your own hands, help in choosing the optimal plumbing device. We will show you how to develop a project and bring the idea of building a hygienic homemade product to life.
In our article, the steps describe the process of building and arranging the soul. The technology for installing the cabin and its connection to the sewage system largely depends on the selected pallet modification.
Design features of showers
Before proceeding directly to the description of the assembly process, we briefly consider the main types of showers available on the market, the criteria for their selection.
Variety of models: which is better to choose
The shower enclosure is a simple design made of a tray and curtains. Instead of the walls that are characteristic of a full-fledged shower, the walls of the room are used. There is no ceiling at the shower enclosure. Its main advantages are low cost and compactness.
A shower corner is one of the simplest, most convenient and cheapest models of shower stalls, it takes up a minimum of space and is suitable for self-assembly
More sophisticated models have a roof and walls. Expensive multifunctional units have rich technical equipment: a Turkish bath or a sharko shower, a flavored steam mode, various types of hydromassage, additional functions, and various backlights.
Expensive model of a shower cabin with hydromassage function, illumination and a deep tray. It requires not only sufficient space for installation, but also the necessary pressure in the water supply
Management of such cabins is carried out by a complex electronic system. Before buying an expensive cabin equipped with a hydromassage function, you first need to find out the level of water pressure in the pipes.
Combined showers are a kind of compromise for those who like to take a bath with a hydromassage and have a full-fledged shower cabin at home. Combined models are distinguished by an original and stylish design - in the market they are often positioned as home spa centers.
You can choose a model of a cabin of any shape that is most suitable for the size and layout of your bathroom: round, square, oval, polygonal, etc.
For a small bathroom, a corner cabin is best suited, which does not take up much space. Corner booths are very popular among owners of apartments of a standard layout, so manufacturers produce a large number of models in a variety of price categories.
Particular attention should be paid to the size of the shower, especially if there is an arrangement of a combined or compact bathroom.
Pallet as a necessary element of a shower cabin
One of the main parts of any shower cabin is the tray. Its main purpose is to collect and remove dirty water through a drain system. Features of the installation of the pallet directly depend on its shape - angular, rectangular, round, oval.
Depending on the height of the sides, there are two types of pallets:
- flat;
- deep, reminiscent of a bath.
Flat models. Due to the low side height of such products, comfort when using a cabin is significantly increased, since there is no need to step over a high obstacle. However, such pallets require an efficient water drainage system, since they cannot hold a large amount of liquid.
Bath tray. Unlike the previous model, this sump is deep enough that you don’t have to worry about the speed of water drainage. Some models include their use as a small bath.
Deep bath tray. If you wish, you can sit down, and a person of small stature or a child can even take a full bath
When buying a shower, first of all, you need to pay attention not to the number of functions and appearance. An interesting solution is a shower cabin with a sauna.
It is to the pallet of the product that increased demands are made. A high-quality pallet must withstand a large load, and with the maximum allowable weight of the user, do not crack, bend or deform.
Shower trays are made from different materials.
Most popular models:
- earthenware;
- made of artificial stone;
- enameled;
- acrylic.
Faience. Everyone knows the material used in the manufacture of toilets. The earthenware tray is completely hygienic, easy to clean and can withstand heavy weight.
The lack of faience is the strong “stickiness” of the material: the surface of the pallet can be damaged even from falling, for example, a glass cup
Fake diamond - reliable and durable material, beautiful and hygienic, but expensive.
Enameled Pallets for shower stalls are cheap and durable. Of the shortcomings, it should be noted only the fragility of the enamel. However, the enamel coating can be easily restored or replaced with acrylic. An additional minus is the rumble of falling water on the metal surface of the pallet.
Acrylic Pallets are most popular. The acrylic surface does not absorb dirt at all, instantly warms up, does not darken with time.
The acrylic scratches are completely invisible - this is an important point, since trays are often scratched when the shower cabin is assembled with your own hands, especially for the first time
The disadvantage of acrylic pallets is the inconvenience in installation, since the installation of a special frame is required. As such, an aluminum construction with adjusting screws is used, with which you can choose the desired pallet height.
A comparative overview of different types of shower trays is presented in this article.
What are the curtains?
The second most important element is the curtains of the cabin, which can be swinging and sliding. Swing doors require more space. They are single-leaf and bivalve.
As for the sliding shutters, they have from two to six leaves, which are held by a rubber magnetic tape. The curtains move on casters hidden inside the shower enclosure frame. Quality curtains should open and close almost silently.
Corner shower with sliding doors. In addition to models with transparent plastic (glass), there are options with frosted blinds
Shower curtains are made of polystyrene or high-quality tempered glass. Polystyrene products are quite cheap and light in weight, however, they quickly lose transparency and remain stained.
Glass curtains are expensive high-quality products.
Swing doors made of tempered frosted glass. In their manufacture, a specially processed safety glass is used, which is superior in strength to even automotive glass.
Water and dirt are very easily washed off the surface of the glass - the material does not absorb and does not fade over the years. You can also buy a booth with curtains from the classic transparent, tinted, colored and roughened glass.
Shower project development
With the seeming technical complexity, the independent construction of a shower cabin, in fact, is quite a feasible procedure for a simple layman, especially for a working host.
As the construction of any capital construction begins with the development of the project, so before starting work on equipping the shower in a private house with your own hands, you need to think about it.
It is advisable to indicate the main plans and schemes on paper, for example:
- a plan for placing a shower cabin in the space allotted for this;
- schemes of connection to power supply networks, water supply and sewerage;
- procedure for equipping a shower room with a ventilation system.
The preparation of the room for the shower and the direct installation of the cabin in it is carried out in several stages.
It is necessary to calculate and plot not only the dimensions of the cab itself, but also all the distances to the points of connection to utility networks, which will help to avoid miscalculations and save materials
It is necessary to calculate and plot not only the dimensions of the cab itself, but also all the distances to the points of connection to utility networks, which will help to avoid miscalculations and save materials
Installation and connection of the finished acrylic booth
How to assemble a shower cabin according to all the rules without critical errors that will affect the functionality of the design? This is quite possible and not even very difficult if you strictly follow the instructions and follow the installation rules of this sanitary ware.
It is difficult to assemble a shower cabin from scratch if you have to work in a limited space, therefore, all manipulations must be carried out slowly, in several stages, with additional assembly and adjustment of the finished structure.
This approach allows you to get by with just one pair of hands, while professionals almost always work together to save time.
The home master, who decided to independently assemble and connect the shower tray, has to perform a number of standard actions:
Image Gallery
Photo from
Stage 1: Preparing to connect to the sewer
Step 2: Connect the plastic elbow to the hose
Stage 3: Assembling the shower tray and attaching the supports
Step 4: Connect the corrugated hose to the siphon
Stage 5: Twisting the legs to the required height
Step 6: Connect the shower tray to the sewer
Step 7: Check the pallet horizontality
Stage 8: Finishing the job
Preparing for quality assembly
A complete set of accessories is required. Before buying, you should carefully check the availability of all parts and their quality. If defects, damage and size mismatch are found, it is necessary to require the replacement of a part or the refusal to purchase the selected model.
Also, for the assembly and installation of a shower cabin with your own hands, you need a prepared place.
Set of tools:
- a drill, and preferably a cordless screwdriver;
- drill bits for metal (6 and 3 mm), bits for self-tapping screws;
- construction level (to adjust the pallet relative to the floor);
- curly and flat screwdrivers;
- adjustable wrench or set of wrenches of the required sizes;
- fum tape or tow;
- sealant for sealing joints.
If the kit does not have hoses for connecting hot and cold water, you should also worry about them in advance.
Cabin installation: work procedure
At the preparatory stage of work, a working platform is selected, where, in fact, the cabin will be assembled. It should be noted that many models are large, therefore it is recommended to assemble individual units in another room adjacent to the bathroom.
Preparing a place for installing a shower cabin. Important requirements: failed communications (water and sewer pipes), flat foundation, waterproofing
All tools should be positioned so that they can be easily reached during work. You can assemble the booth yourself, but it is still highly recommended that you do it together, since at certain stages of assembly, an exact matching of some parts is required.
The walls and floor adjacent to the booth should be flat, without any differences. Start by installing the drain. For pallets made of acrylic, the joint is treated with a transparent sealant.
First of all, it is necessary to mount a drain for dirty water. In another way it is called a “gangway”. In plumbing stores - a variety of models that differ in shape and size
The next step is to install the structure from the steel profile to the bottom. On this frame, studs for legs will be installed a little later.
This is what the frame for a corner shower looks like. Do-it-yourself bricks or concrete structures made from cement mortar are often used as backups.
Next is the installation of studs. We thread them through the holes provided for this in the frame, in the grooves of the pallet we twist as tightly as possible.
Acrylic tray with screwed-in studs and one finished central leg. The studs are arranged so that the weight of the structure is evenly distributed over the entire area
The short part of the frame has a special rigidly welded nut, which is needed for mounting the central leg. After the leg is screwed in, the nut is installed, after it the counter washer, then another nut.
We install all the other legs on the studs, after which the pallet can be moved to the installation site and set it evenly using the level. For deep bath pallets, a more or less even horizontal will suffice, but small pallets must be set strictly according to the instructions, adhering to the specified inclination angles.
When connecting the pallet to the drainage system, it is better to abandon the corrugation, preferring a straight 50-mm pipe. Which will be mounted at an incline to the riser
When connecting a ready-made shower tray to the sewer:
- connect a shower siphon to the drain hole;
- Dock the corrugated pipe with a siphon;
- connect the second end of the corrugation with the hole of the sewer drain and fix it;
- treat all joints with waterproof sealant.
All connections are threaded or soldered. A siphon is necessarily used to drain sewage, as it creates a water lock that prevents odors from entering the shower room.
The slope of the drain pipe to the sewer outlet should be as large as possible, and be at least 3 degrees. The correct installation of the drainage system and the tightness of all connections must be checked by spilling water through the sump
Pay attention to the gap between the bottom of the product and the floor - it should be enough for laying and possible repair of communications.
Now you can start assembling the walls, curtains and assembling all the rest of the equipment, in particular - to assembling the frame. To prevent corrosion, frames are most often made of aluminum. Each side of the frame, depending on the type of cab, is assembled separately.
It is recommended that all joints from the outside be treated with an acrylic-based sealant. For internal joints, it is better to use a colorless sanitary sealant. Almost all fasteners in low-cost models are made using metal screws.
For greater strength and durability of the joints, it is recommended to replace the self-tapping screws with M5 bolts, nuts and washers. All fasteners do not need to be clamped immediately to the stop - this is done only after installation.
The fixture is finally fixed after all elements of the shower cabin are checked for functionality. After that, you can seal all the seams, joints and proceed with the assembly of frame profiles.
Features of the installation of various purchased models
Each type of design has its own characteristics, which should be taken into account during the installation process.
The nuances of installing open booths
Since the design of open-type cabs is quite simple and consists of one aluminum frame, the assembly usually does not cause much difficulty. Having assembled the aluminum frame, they immediately begin to mount it on a pallet.
To prevent the cab from staggering and tipping over during operation, almost all open-type models are mounted to the walls with a transition profile in a vertical position
The end face of the aluminum frame is attached to the wing of the transition profile with fasteners or special latches. All seams at the joints are treated with sealant. As soon as the frame is securely attached to the wall, deaf transparent elements are mounted.
The kit must necessarily have special mounting clips that are needed to fix the deaf glass in the frame of the shower.
The glass is fixed by pressing it tightly to the frame and fixing with clips, but not too tight so that it does not crack. In open cabin models, sliding doors are most often provided. There are special rollers on the door frame. They are installed in the lower and upper guide grooves.
The specifics of installing glass on a booth depends on the type of door construction. In order for the flaps to fit snugly together, a magnetic plastic overlay is installed on their outer ends.
Assembly of enclosed structures
This option is almost identical to the method described above, but with some slight differences.
The walls of the shower cubicle are assembled separately and attached to the pallet in an already finished, assembled form. First of all, the rear walls of the cab are mounted, in which the nozzles for hydromassage are located, and only after that the front part is installed.
Multifunctional shower enclosure. As soon as the back of the cabin is installed in place, hydromassage equipment is connected to the water supply and power supply.
During the installation, they adhere to safety regulations and connect the flexible hoses of the cab with the hot and cold water supply system as efficiently as possible.
In closed models, the deaf parts of the front panel are installed differently. Most often, additional parts from an aluminum profile are used for this.
For installation, the sheet is applied to the edge of the frame, the location of the fastening of the reinforcing profile, which simultaneously plays the role of a stiffener for the entire structure, is noted.
Then, with a drill or a screwdriver, holes are made for bolts or self-tapping screws, the profile is pressed tightly to the glass and fixed to the frame. All seams and joints are sealed, the elements of the shower stall are checked for functionality, and then a decorative panel (apron) is installed on the pallet.
Remember that you need to focus on the instructions and the scheme for assembling the shower cabin.
The specifics of installing a corner cabin
Corner - the most common options for showers, as they take up little space and are inexpensive.
Installation of angular views is simple and takes a little time, however, for proper assembly, you need to know some nuances, for example, the proportionality of the angular distance of the walls (+)
Before starting installation, be sure to ensure that the distance between the walls at different heights is the same. The frame of the corner cabin is very rigid, and all the irregularities of the wall after installation will be visible under the frame, in addition, water will enter the room through the cracks.
If you try to tighten the frame to the wall, it can become deformed, after which it will be impossible to install doors and deaf parts of the cabin.
Image Gallery
Photo from
Corner Cabin Frame Details
Connection of cabin frame parts
Attaching the lower trim to the pallet
Installing a shower head rail
The installation technology of reinforced metal models requires a special approach and the creation of a reliable foundation.
Furnishing a booth with a homemade pallet
If you do not take into account all the nuances of the construction of homemade pallets, depending on the chosen design of the cabin, then using the example of a concrete or brick pallet as the most popular materials, we will consider step-by-step instructions.
Stage # 1 - preparatory work
The very first step is preparation. It will look like this:
- Thoroughly clean the shower floor and adjacent wall sections.
- Waterproof the base of the pallet.
- Arrange a primary cement screed, if it was not.
- Primer and treat the base of the future cab with a highly adhesive waterproofing compound, for example, bitumen mastic.
- Install a shower drain in a selected place, strictly according to level, and, in accordance with the instructions, connect it to the sewer.
- Mount the formwork.
- Pour with concrete or lay out of the brick the inside of the shower tray and sides.
After all the preparatory work has been completed, calculations have been made, all the necessary components have been selected and purchased, you can begin the basic work on its construction.
It is important to initially plan the placement of the shower, given the exit of the sewer pipe. It is advisable that the drain path to it be the shortest without sharp turns
Stage # 2 - water supply
With the right selection of all materials and the availability of the necessary tools, connecting a shower to the water supply and sewage networks will not be difficult. As a rule, in a private house, hot water is supplied to the shower from a gas or electric boiler. For this, tees or fittings with a threaded connection are used.
The main nuances of water supply:
- The distance between the pipes of hot and cold water, to exclude their temperature influence on each other, should be at least 10-15 cm.
- The diameter of the pipes is selected depending on the water pressure, optimal is 27-30 mm.
Flexible hoses are used to supply water directly to the shower panel or faucet. All connections must be made using gaskets and FUM tape.
On the water supply pipes, water shut-off valves are installed using winding 8-10 turns of the FUM tape on the thread, twisting it only clockwise
Step-by-step instructions for connecting to a water supply:
- shut off the water supply on the main pipelines;
- insert gaskets into the flexible connections on the side of the hot and cold water pipes;
- Connect the hoses to the piping without much effort.
Stopcocks should be installed on all connections to plumbing fixtures.
Stage # 3 - providing waterproofing
A very important point in the device of the pallet is the primary waterproofing. It is carried out before the screed is installed, by covering with a special film or roofing material the joints of the floor with the walls, with the establishment of a waterproofing material on them.
When buying a waterproofing composition, it is necessary to pay attention to the area of its application. It should be labeled as used for showers.
To plan further work, it must be borne in mind that the complete drying of the concrete layer from which the base of the pallet is built, especially if this layer is thick enough, takes place in at least a week.
After the cement has dried, finishing waterproofing is performed before the beginning of the facing work. The surfaces and joints of the pallet are smeared with water-repellent mastic, and a special waterproofing tape is laid around the entire perimeter.
The finished design of the future pallet should be carefully isolated from the possible influence of water. For this, various materials are used, for example, water-repellent mastic. It is applied, trying not to miss a single patch
Stage # 4 - pallet construction
As an alternative to the classic version of the booth with a ready-made tray, you can build a shower completely with your own hands, starting with the device of its foundation.
For this purpose, you can use brickwork, concrete blocks or cement screed. Water drainage in such pallets is carried out using shower drains, the installation features of which will be discussed below.
Cement-lime compounds are not suitable for use. Concrete is prepared from a mixture of cement and pure sand, or ready-made mixtures are used, but, necessarily, labeled as waterproof.
Not always the owner of a private house chooses the option with a brick frame for the tray of a home-made shower. Often it is replaced by a completely concrete screed. This option of constructing a makeshift shower cubicle will ultimately come out no worse than a cabin with a pallet
When a pallet is installed, a drain is constructed completely from concrete, and then, already with the help of formwork, the bulk floor rises to the level of the ladder.
Not only the slope must be sustained to the ladder, but also a reserve for the thickness of the facing tile must be provided. The grate of the ladder should be a few millimeters below the floor.
In order to maintain the desired angle of inclination of the screed, beacons are installed in the interior of the pallet during its construction
Stage # 5 - frame construction and decoration
The most common and optimal choice of place for the construction of a shower cabin is in the corner of the room. With this arrangement, not only space is saved, but also there is no need to install two walls that replace the walls of the room itself.
The construction of a homemade pallet in the corner of the room is fully assembled. She has dried up and is ready to perform facing work. Which is easy to do with your own hands, choosing the most suitable material
The arranged construction of the pallet and walls are revetted. The choice of the method of finishing the shower cabin should be approached with particular responsibility, since this room is with a high degree of humidity and is subject to constant exposure to water and steam.
Tile Features
As a rule, for facing walls and other elements of the shower box, ceramic tiles are used that harmoniously fit into the overall design of the shower cabin and the room itself.
Choosing the option of finishing with shower tiles, it is necessary to take into account the fragility of this material under strong mechanical stresses. If necessary, using dowels, shelves and other objects to the walls of the bathroom, holes in the tile or at its joints should be drilled very carefully.
To make a hole without damaging the tile, you must use a special drill with a solder at the end, and the drill should work in drilling mode
At the same time, the tile has many undeniable advantages over other materials and is a leader in use in premises of this type.
The advantages of tiles include:
- tightness;
- a significant service life, which, with the right laying technology, is 20 to 25 years;
- simplicity in leaving;
- relatively affordable price;
- resistance to temperature influences;
- the possibility of facing not only the walls, but also the pallet, sides and floor in the shower room.
We should not forget that the wet tile is quite slippery, therefore, in order not to get injured, it is advisable to use a rubber mat on the floor in the shower cabin, which can be easily selected both in size and color.
A comb spatula is used to apply tile adhesive. It is recommended to start laying tiles from the floor. Depending on the design of the tile laid on the floor, the walls are lined. Proceed to lay the tiles on the walls from the central corner, towards the edges.
Since the size of the shower cabin is not too large, you can pre-plan the option of laying tiles on the surface of the floor or wall and make markings. The purpose of the marking is to ensure that at the corners there is no need to cut the tile, part of which will be less than half of the whole plate.
If possible, it is better to trim the cabin using mosaics. This type of tile has a rich color palette, well decorates plumbing and visually smoothes the slopes of the pallet
Paneling Rules
The use of plastic or siding is a more budgetary option for finishing the walls of the cabin. If you have the necessary skills in installing panels of these materials, high-quality tightness in the room will be achieved and the attractive appearance of the shower room will be preserved for a long time.
Plastic panels are an inexpensive and practical solution. Moreover, this material is easy to mount with your own. And the result will please you the next decade
For mounting panels on the surface to be trimmed, a vertical or horizontal crate is fastened in increments of 50-60 cm. The ceiling can also be closed with plastic panels and siding. The material does not require much care.
Latex paint
The presence of modern finishing materials does not push into the background the old proven method - painting the walls. This is the simplest and least expensive, both in time and financially, option for finishing showers.
The use of latex paint does not at all suggest that the waterproofing qualities and aesthetics of the room will be brought at the expense of cost advantage.
Paint does not mean at all boring and plain interior in the bathroom. If you wish, you can do it yourself with your own hands, using prepared stencils. For this, it is not necessary to have experience in painting, and the result will please you
The main guarantee of the absence of the need for a quick re-repair of the shower room after its painting is a thorough surface preparation.
The walls of the shower room for painting should be perfectly aligned. After which they are to be coated with start and finish putty and primer
In addition to the materials used for decorating showers, there are a number of other, relatively expensive and technically difficult to work with. For example, marble, granite or decorative stone. The choice remains with the owner of the house.
Stage # 6 - cabin fencing device
Cabin fencing, as a rule, is made after connecting the pallet to the sewer.
The design of a homemade shower can have several options:
- angular square or rectangular;
- in the form of faces;
- with a semicircular connection of 2 walls.
The methods that are used when installing the walls of the cab with a finished pallet and a self-constructed pallet are almost the same.
The shape of the shower cabin can be very different - here the owner has the right to show imagination. The main thing is that the invented design harmoniously fits into the interior of the bathroom
Regardless of the type of cab selected, the doors to it are installed oar or sliding type.
The front of the cab can be equipped with additional side walls, usually made of the same material as the sash. These walls are mounted using a vertical profile. Special gaskets are attached to the flaps, which are recommended to be treated with silicone.
Installation of swing doors
The process of hanging swing doors in a do-it-yourself shower cabin is not very difficult. Commercially available furniture hinges are used for this. At the joints are installed sealing elements.
Installing the swing structure is easy. It is important to buy high-quality furniture hinges - because they have to serve in high humidity
Installing Sliding Sashes
For sliding sliding doors, frames or niches are mounted in the base and upper part of the cab along which they will move on casters. Such a door is hung on the profile and mounted on casters.
Door adjustment is carried out with the help of eccentrics, which are equipped with rollers.The glass sliding door can be equipped with a magnetic gasket to close end-to-end, like a refrigerator door
Stage # 7 - connecting a makeshift pallet
At the first stage of the device of a makeshift pallet, a drainage system is mounted in which not the usual hydroboxes are used, but shower drains. There are two types of ladders: slotted and square-shaped.
A square gangway must be installed in the center of the shower cabin, following the slope to the drain grid in the form of an envelope, otherwise the water will stagnate
When selecting a ladder, in order to exclude the effect of a “pool of dirty water” in the pallet, it is necessary to compare its capacity indicator with the performance of shower heads. A drainage capacity of 30 to 48 l / min is considered good.
The place to install the slit ladder is chosen near the wall of the cabin. The throughput of this design will be higher. It is necessary to create a slope to a ladder of any kind at a rate of at least 3 mm / m. All water discharge pipes are mounted on the floor.
When installing and connecting the ladder, you must adhere to the manufacturer's recommendations set forth in the user manual. Following which, you can do all the work on connecting to the drain system do it yourself
Another way to drain for a makeshift pallet is through a drainage channel, which can be placed across the entire width of the shower, which will ensure uniform discharge of water into the sewer. Installation and connection of drains and drainage systems to the sewage system is carried out using the equipment included in their kit.
The following article, which provides step-by-step installation instructions, will familiarize you with the technology of constructing a shower cabin without a pallet.
You can learn more about the assembly of shower stalls by watching the following videos.
Video # 1. How to build a shower tray from concrete with your own hands will be discussed in the following video:
Video # 2. Another option for the independent arrangement of a shower tray:
Video # 3. Available and fast about all stages of assembly of an acrylic shower tray:
If all the recommendations and instructions are followed, then a do-it-yourself shower cabin will not bring a single drop of disappointment. It will not only equip life and create additional comfort, but also harmoniously fit into the interior of any home, give a modern and aesthetic appearance to the home.
Want to talk about how to build a shower cabin with your own hands? Does your arsenal have technological subtleties that are worth sharing with site visitors? Please write comments in the block below, post photos with the device process, ask questions.