We are used to considering natural gas as the most affordable type of fuel. But it turns out that he has a worthy alternative - hydrogen obtained by splitting water. The starting material for the production of this fuel is generally free. And if you also make a hydrogen generator with your own hands, the savings will be simply amazing. Right?
We are ready to share with you valuable information about the options and assembly rules for a technical installation designed for hydrogen production. Studying the article presented to your attention will become a guarantee of the production of a faultlessly functioning device.
Those who wish to build a generator of cheap, but very productive fuel with their own hands, we offer detailed instructions. We give recommendations for competent operation. As informative additions that clearly explain the principle of action, photo applications and videos were used.
Hydrogen Production Methods
High school chemistry lessons once gave explanations on how to get hydrogen from ordinary water flowing from a tap. There is such a thing in the chemical field - electrolysis. Thanks to electrolysis, it is possible to produce hydrogen.
The simplest hydrogen installation is a kind of tank filled with water. Under the water layer are two plate electrodes. An electric current is supplied to them. Since water is an excellent conductor of electric current, a contact with low resistance is established between the plates.
The current passing through the low water resistance contributes to the formation of a chemical reaction, as a result of which hydrogen is formed.
The scheme of the experimental hydrogen installation, which in former times was studied in a chemistry program in chemistry classes. As it turns out, for the practice of modern everyday needs, those lessons were not superfluous.
It would seem that everything is simple and quite a bit remains - to collect the formed hydrogen in order to use it as an energy engineer. But in chemistry, it never dispenses with subtle details.
So it is here: if hydrogen combines with oxygen, an explosive mixture is formed at a certain concentration. This moment is one of the critical phenomena that limits the ability to build sufficiently powerful home stations.
Hydrogen generator design
For the construction of hydrogen generators with their own hands, they usually take the classic Brown installation scheme as the basis. Such an average power electrolyzer consists of a group of cells, each of which contains a group of plate electrodes. The power of the installation is determined by the total surface area of the plate electrodes.
Cells are placed inside a tank that is well insulated from the external environment. Pipes for connecting a water line, hydrogen outlet, as well as a contact panel for connecting electricity are displayed on the tank body.
The apparatus for generating hydrogen, designed according to the Brown scheme. According to all calculations, this installation should completely provide the household with heat and light. Another question is what dimensions and capacities will allow this to be done (+)
The Brown generator circuit, among other things, provides for a water shutter and a check valve. Due to these elements, the installation is protected against hydrogen return. According to this scheme, the assembly of a hydrogen installation is theoretically possible, for example, for organizing heating of a country house.
Hydrogen heating in the house
Assembling a hydrogen generator for efficient home heating is not a fantastic idea, but obviously extremely unprofitable. In order to get the required amount of hydrogen for a home boiler room, you will need not only a powerful electrolysis unit, but also a significant amount of electrical energy.
Compensation of consumed electricity with hydrogen obtained at home is seen as an irrational process.
A real-life home hydrogen generator. The only thing that upsets is just an experimental version, which can only show how a flame arises from a spark
Nevertheless, attempts to solve the problem of how to make a hydrogen generator for a home with your own hands do not stop. An article with which we recommend that you familiarize yourself with the principle of operation and the design of one of the tested in practice models of a hydrogen boiler
And here is an example of one of the torture options:
- A tight, reliable container is being prepared.
- Tubular or plate electrodes are made.
- A control circuit for operating voltage and current is being assembled.
- Additional modules for the workstation are being made.
- Accessories are selected (hoses, wires, fasteners).
Naturally, you will need a tool kit, including special equipment, for example, an oscilloscope and a frequency meter. Having been equipped with everything you need, you can proceed directly to the manufacture of a hydrogen heating installation for the home.
Do-it-yourself project implementation
Initially, you need to make a hydrogen generation cell. The fuel cell has overall dimensions slightly smaller than the internal dimensions of the length and width of the generator housing. In height, the size of the block with electrodes is 2/3 of the height of the main body.
The cell can be made of textolite or plexiglass (wall thickness 5-7 mm). For this, five textolite plates are cut in size. Of these, a rectangle is glued (with epoxy glue), the lower part of which remains open.
Roughly such organic glass plates form the body of the fuel cell of a hydrogen generator. True, a slightly different version of engineering is shown here - for assembly and fastening with screws
On the upper side of the rectangle, the required number of small holes are drilled for the shanks of the electrode plates, one small hole for the level sensor, plus one hole with a diameter of 10-15 mm for hydrogen output.
Inside the rectangle are placed platinum electrodes, the contact shanks of which are brought out through the openings of the upper plate outside the cell. The water level sensor is installed at 80% of the cell fill. All transitions in a textolite plate (except for the hydrogen output) are filled with epoxy glue.
The design feature of the modules shown in the photo of the generator is a cylindrical form of execution. The electrodes of this miniature energy source are also made differently.
The hydrogen outlet hole must be equipped with a fitting - fix it mechanically, using a seal or glue it. The assembled hydrogen generation cell is placed inside the main body of the device and is carefully sealed along the upper perimeter (again, epoxy can be used).
This was the case for the hydrogen generator for the next pilot project. It attracts a simple idea, but this option is unlikely to be suitable for a powerful station designed for heating rooms in a private house
But before laying the cell inside, the generator housing must be prepared:
- make a supply for water in the bottom area;
- make the top cover with fasteners;
- pick up reliable sealing material;
- place an electrical terminal block on the cover;
- place a hydrogen collector on the cover.
The result should be a partially ready-for-use hydrogen generator after:
- The fuel cell is loaded into the housing.
- The electrodes are connected to the terminal strip of the cover.
- The outlet of hydrogen is connected to a hydrogen collector.
- The cover is mounted on the housing through the seal and secured.
It remains only to connect water and additional modules.
Additions to the hydrogen generator
A homemade device for producing hydrogen must be supplemented with auxiliary modules. For example, a water supply module that integrates functionally with a level sensor mounted inside the generator.
In a simple form, such a module is represented by a water pump and a control controller. The pump is controlled by the controller according to the sensor signal, depending on the water level inside the fuel cell.
Additional structural elements that you want to include in the design of any hydrogen station, and even experimental. Without automation, control and protection devices, a hydrogen generator cannot be operated
In fact, it is also desirable to have a device that controls the frequency of the electric current and the voltage level applied to the terminals of the working electrodes of the fuel cell. At a minimum, the electrical module must be equipped with a voltage stabilizer and overcurrent protection.
The hydrogen collector, in its simplest form, looks like a tube, where the valve, pressure gauge, check valve are located. Hydrogen is taken from the collector through a non-return valve and can actually be supplied to the consumer.
The hydrogen collector and gauge are integral parts of the hydrogen system, which ensures gas distribution and pressure control
But in practice, everything is somewhat more complicated. Hydrogen is an explosive gas having a high combustion temperature. Therefore, simply taking and pumping hydrogen into the boiler system as fuel - this will not work.
Installation Quality Criteria
It is extremely difficult to assemble a high-quality efficient and productive installation at home. For example, if you even take into account such a criterion as the metal from which the electrode plates or tubes are made, there is already a risk of encountering problems.
The durability of the electrodes depends on the type of metal and its properties. You can, of course, use the same stainless steel, but the lifespan of such elements will be short-lived.
A kind of parody of electrode plates for a hydrogen generator. The plates are taken from a conventional variable capacitor, which are made of aluminum. Such electrodes will last exactly half an hour, even as part of a small experimental system
The installation dimensions also play a significant role. Calculations are required with high accuracy in relation to the required power, water quality and other parameters.
So, if the gap between the working electrodes is outside the calculated value, the hydrogen generator may not function at all. In the worst case, the power for which the calculation was made will be several times smaller.
Even the cross section of the wire connecting the electrodes to the power source matters in the device of the hydrogen generator. True, here it concerns the safe operation of the device. Nevertheless, this detail of the design in the home version should be taken into account.
Returning to the safe operation of the system, one should also not forget about the introduction of the so-called water shutter into the design, which prevents the reverse movement of gas.
Despite the rather impressive number of developments of home-made hydrogen generators, there is no really effective option yet. All models are inferior to factory equipment.
Industrial Generator
At the industrial production level, manufacturing technologies for household hydrogen generators are gradually being mastered and developed. As a rule, power plants of home use are produced, the power of which does not exceed 1 kW.
Such an apparatus is designed to produce hydrogen fuel in a continuous mode of operation for no more than 8 hours. Their main purpose is energy supply of heating systems.
Installations for use as part of condominiums are also developed and produced. These are already more powerful structures (5-7 kW), the purpose of which is not only the energy of heating systems, but also the generation of electricity. This combination option is rapidly gaining popularity in Western countries and in Japan.
Combined hydrogen generators are characterized as systems with high efficiency and low emissions of carbon dioxide.
An example of a real industrial plant with a capacity of up to 5 kW. In the future, such installations are planned to be done to equip cottages and condominiums.
Russian industry also began to engage in this promising type of fuel production. In particular, Norilsk Nickel is mastering the production technology of hydrogen plants, including domestic ones.
It is planned to use a variety of types of fuel cells in the development and production process:
- proton-exchange membrane;
- phosphoric acid;
- proton-exchange methanol;
- alkaline;
- solid oxide.
Meanwhile, the electrolysis process is reversible. This fact suggests that it is possible to obtain already heated water without burning hydrogen.
It seems that this is another idea, seizing on which you can launch a new round of passions associated with the free production of fuel for a home boiler.
When experimenting with home-made models at home, you need to prepare for the most unexpected results, but negative experience is also an experience:
Do-it-yourself hydrogen generators for the home are still a project that exists at the level of one idea. There are no practically realized projects of hydrogen generators with their own hands, and those that are positioned in the network are the imaginations of their authors or purely theoretical options.
So it remains only to rely on an industrial expensive product, which promises to appear in the near future.
Do you know the original model of a hydrogen generator that is not described in the article? Maybe you want to share valuable information that will be useful to home masters? Please write comments in the block below, post a photo on the topic, express your opinion.