Pipes from the symbiosis of metal and plastic are produced for the arrangement of intra-house highways. New products made it possible to assemble the water supply and heating system itself, without involving plumbers. Pipelines serve for a long time, they are extremely simple and quick to install, without creating problems even for inexperienced craftsmen.
Having completed the installation of metal-plastic pipes with your own hands, you can save a lot of money while maintaining the family budget for more important costs. To install them, the home master needs to stock up only with a simple tool to use, patience and knowledge that we are ready to share with visitors to the site.
We will tell you all about the specifics of using metal-plastic products and how to connect the pipelines assembled from them. The article describes in detail the negative and positive aspects of their use. Here you will learn how to install fail-safe operating systems.
Features of plastic products
Metal-plastic (metal-polymer pipes) - composite products for the production of which various types of materials are used. Such elements have an attractive appearance, good wear resistance, elasticity, strength.
Plastic pipes are characterized by high consumer qualities (strength, flexibility, resistance to high temperatures and aggressive substances), as well as aesthetic appearance
Typically, a pipe consists of five layers. A strong polymer, usually crosslinked polyethylene, is used as the carrier base. It gives smoothness to the inner surface, protecting it from blockages, and also contributes to the strength of the product.
An adhesive is applied to the core, on which an aluminum foil stabilizing the pipe is fixed (it also prevents oxygen from entering). The connection is fixed by butt welding or overlap.
The design of the metal-plastic pipe involves the use of five layers of different materials: two layers of polyethylene, two layers of glue, a layer of aluminum foil
The fourth layer also applies glue to which the outer coating is connected - white polyethylene, which provides protection to the product and gives it an aesthetic appearance.
Technical characteristics of pipes D 16-20 mm
Here are the data characteristic of metal-plastic pipes of widespread diameters (16 and 20 mm):
- The wall thickness is respectively 2 and 2.25 mm; the thickness of the aluminum layer is 0.2 and 0.24 mm.
- One running meter weighs 115 and 170 grams and contains a volume of liquid equal to 1,113 and 0,201 liters.
- The thermal conductivity coefficient is 0.43 W / m K, the expansion coefficient of metal-plastic is 0.26x104 by 1 degree Celsius, the roughness coefficient is 0.07.
- With a transverse rupture of the material, the strength coefficient is 2880 H.
- The bond strength of the adhesive layer with the foil is 70 H / 10 sq. Mm, the coefficient of strength of the aluminum welded layer is 57 N / sq. mm
- Plastic pipes can work even at +95about C, briefly withstanding temperatures + 110-130about FROM.
- In temperature limits from 0 to +25about C the system operates at a pressure of up to 25 bar, and at +95about C withstands pressure of 10 bar.
- The tightness and integrity of the metal-plastic pipe is broken at a load of 94 bar (at +20about FROM).
With proper installation and compliance with operational rules, products made of metal polymers can last 50 years or more.
Advantages and disadvantages of metal polymers
The advantages of such products include:
- simplicity of installation: connection of various categories of metal-plastic pipes is quick and easy;
- high heat resistance (water heated to 100 ° C can be transported);
- reasonable price (metal-polymer pipes are cheaper than metal and most plastic analogues);
- high strength, ring stiffness;
- resistance to corrosion, aggressive environments;
- unwillingness to form deposits and blockages;
- aesthetic appearance;
- high throughput;
- low thermal conductivity;
- sufficient ductility;
- easy repair;
- durability.
The main disadvantage of such products lies in the fact that the metal and plastic of which the pipes are composed have different expansion rates. Regular temperature differences of the agent located in the pipes can lead to weakening of the fasteners, which leads to leakage in the structure.
To avoid this, experts advise, when installing, to always provide a certain margin at the joints of pipes. It will also be useful because metal-plastic systems do not withstand water shocks.
Image Gallery
Photo from
Plastic pipes are used in the organization of cold and hot water supply, in the installation of conventional and underfloor heating systems, water treatment pipelines for pools, greenhouses, greenhouses, etc.
Due to the presence of an aluminum layer between the outer and inner polymer shell of the pipe, the metal-plastic lines work in systems with a pressure of up to 10 bar
Flexibility is considered to be a valuable advantage of metal-plastic pipes, which allows to reduce the length of the route and use a minimum of connecting fittings
Plastic pipes are used in the construction of new pipelines and in repair work, they work perfectly in tandem with all existing types of pipes
The service life of metal-plastic pipes exceeding 50 years, their reliability and minimal expansion, compensated by the metal component, allows you to lay pipelines in a hidden way. Although in rare cases in small areas they are laid openly
The flexibility of metal-plastic products is ideally suited for the installation of collector wiring and floor heating systems
Fittings are produced for the formation of durable joints of metal-plastic pipes, assembly of branched systems, connection of fittings
Metal-plastic pipe connections are made using press fittings installed by crimping and compression fittings mounted with a clamping nut
Metal-plastic long products
Connecting the radiator to the heating circuit
Benefits of Flexibility in Long Products
Combination with pipes of a different structure
Open laying of communication lines
The device of collector wiring and floor heating
Connecting fittings for metal
Press fitting installation with specialized pliers
It is simpler and easier to evaluate the pros and cons of these pipes in comparison with metal-plastic and polypropylene products. A comparative review is given in our recommended article.
Fields of application of metal-plastic elements
Pipes made of metal polymers are widely used in the arrangement of individual houses, in industrial construction and agriculture.
The main areas of their use are:
- transportation of liquids, gaseous agents;
- laying of drainage systems, water supply systems, heating;
- in designs involving the transfer of compressed air;
- connection of heating components to radiators, floor heating device;
- installation of conditioning circuits;
- protection and shielding of wires (primarily power);
- construction of irrigation systems.
Metal-plastic is not recommended for use:
- in the organization of central heating systems with the proposed arrangement of elevator units;
- in places with the assigned fire safety level “G”;
- when the expected flow of hot fluid in the pipeline with a working pressure> 10 bar;
- in rooms where it is planned to place sources of thermal radiation with a surface temperature of more than 150 degrees C.
In addition, metal-polymer pipes are undesirable to use in safety, signal, overflow, expansion circuits and fire water supply systems.
Metal-plastic products are widely used in private and industrial construction. This photo shows the pipes used for laying heating systems
Three main pipe routing methods
The wiring of metal-plastic systems can be carried out by different methods, each of which is selected based on the feasibility and possibilities of further access to the system.
Option # 1: Hidden
In this case, all pipes and joints are hidden in the depths of the wall under the finishing materials. Only fittings and bends for connecting plumbing devices are brought out.
A hidden installation method involves installing the structure in the wall, where recesses are specially prepared for the pipes, after which the surface is sealed
When using this installation method, the interior design is preserved, in addition, masking communications protects them from accidental damage.
This option has several disadvantages:
- For laying channels under the pipes, a complex and laborious process of gating is required. After laying communications, the surface has to be restored again.
- A similar method is not suitable for load-bearing walls, where it is forbidden to carry out gating with regulatory documents.
- Fairly high cost associated with additional work.
This method is best used during repairs in the bathroom. It is not advisable to arrange a hidden gasket in an already decorated room, since this will require the complete dismantling of the wall covering (cladding, plaster).
Option # 2: open
If the pipes cannot be hidden in the wall for any reason, they can be laid along its surface. This option is more convenient for visual inspection of the joints, which allows you to quickly clean the area or replace a component if necessary.
With the open method, pipes are laid on the surface of the wall, which allows for control of joints and reduces the cost of work
Open wiring can be used in rooms that have already been repaired, since installation will not harm the design of the walls. The advantages of this method include its ease and lower cost of work than when laying internal communications.
Option # 3: Combined
In this case, the pipes are held on the surface of the unfinished walls, after which they are closed with boxes or false panels. This is a rather complicated method, because it requires a perfect fit into the interior of decorative elements, which can also be used as drywall, tile and other materials.
Wiring diagrams for bathroom and bath
In plumbing work carried out in bathrooms and toilets, three schemes of wiring metal-plastic pipes can be applied. For private homes, the most rational is the use of a collector.
Efficient Collector System
A reliable and practical option, involving the connection of each object to the central pipe through a supply pair. This allows the tap to regulate or turn off the water supply to each specific plumbing fixture.
With parallel wiring, each plumbing device is equipped with its own water supply line and its own shut-off valve. All branches exit from one device - collector
All control devices are located in a compact manifold, which is placed in a specially designated space (cabinet).
Inlet pipes with a minimum of connections do not require special control, which allows laying in a hidden way. The disadvantage of this option is the rather high cost, since for each connection you will need to purchase a special shut-off valve. Since such a system is quite complex, work must be done carefully and thoroughly.
In the collector water distribution wiring, control devices and locking devices are installed on the pipe supplying water to the collector
An important advantage: in the event of failure of a single item (washing machine, mixer), there is no need to completely disconnect the bathroom from the water supply - just turn off the necessary shut-off valve.
Serial connection system
This option involves connecting each sanitary item to the main pipe using a separate tee. It is more suitable for bathrooms with a minimum number of objects (washing machine, general mixer).
The serial wiring, schematically shown in the figure, is recommended for rooms with a small number of objects that are connected to the pipes in turn using tees
The sequential scheme can be implemented already after completion of the finishing work in the room using an open laying system. The assembly process is quite simple: the pipe is laid from one object to another, at the same time the inlet element is removed from the tee.
This option requires minimal financial costs. It should be noted that with a large number of points of fluid intake, the pressure may not be enough, and the system will function with difficulty or even completely fail.
Power Outlet System
The connection of plumbing devices is similar to serial, but sockets are used instead of tees. This scheme is usually used only in individual houses, since it requires the laying of pipes of large lengths, as well as the installation of an additional pump, which will help ensure the necessary water pressure.
When performing connecting work with metal-plastic pipes, several important nuances should be taken into account:
- When designing, it is desirable to provide a minimum of connections.
- It is important to use a pipe and couplings made of the same material.
- For pipelines, it is better to use thermal insulation to prevent condensation from settling.
- It is necessary to provide free access to metering devices, filters, plug-in connections.
Compliance with the rules will create a reliable system that can last for many years.
Wiring of sewer pipes
The installation work of sewer metal-plastic pipes has its own characteristics.
Sewer wiring made of metal-plastic has a number of features. In this case, it is important to use pipes of larger diameter, as well as take measures to organize the inclination of the pipeline
In this case, for the unhindered drainage with the prevention of blockages, it is important to observe the following requirements:
- Maintain a slope (0.02-0.03 from the integral length of the structure) towards the drain manifold.
- It is forbidden to place bends at an angle of 90 degrees when installing structures.
- The need to install special tees with removable covers (revisions) in areas before bends, prone to the formation of blockages.
- When installing the system in a hidden way, it is important to leave inspection windows opposite the revision.
- When assembling the system, it is important to leave a reserve intended for the thermal expansion of the product.
For the installation of sewage, it is necessary to use pipes whose diameter ensures easy passage of wastewater.
For toilets, it is recommended to use products with a diameter of at least 100 mm, for bathtubs and sinks - 50-75 mm are sufficient.
Rules for the installation of structures made of metal polymers
When laying metal-plastic systems, it is important to be guided by the following provisions:
- When concealed laying of pipelines from this material, it is important to provide removable shields (hatches), devoid of sharp protrusions. They provide access to compression fittings.
- It is important to lay systems through building structures using sleeves, the inner diameter of which is 0.5-1 cm larger than the similar pipe parameter. The gap that is formed between the elements must be filled with a soft non-combustible material, which ensures the movement of the pipe in the longitudinal direction.
- When laying metal-plastic plumbing or heating systems, it is important to prevent damage to the surface of the elements, including scratches or cuts. To unpack the bay, it is better to avoid sharp objects, and mark the structure with a pencil or marker.
- Installation of the structure can be carried out using supports or suspensions, which are usually present in the assortment of manufacturers of metal-polymer pipes. They help to fix the products to the wall, while metal parts are installed with gaskets made of soft material.
All stages of operations must be carried out carefully and accurately, since the metal-plastic elements are sensitive to ultraviolet radiation, mechanical damage. External installation of such structures is appropriate to carry out only in places where there are no such factors.
Tools and materials for pipe laying
For laying metal-polymer systems, a minimum of devices and materials is required, but it is better to choose high-quality devices and pipes.
Pipeline Mounting Devices
To create a structure made of metal-plastic, a rather modest set of tools is enough: a pipe cutter, a simple pipe bender, press tongs, an adjustable and combination keys.
To install a metal-plastic system with your own hands, you need a minimum of tools, which can be purchased in a set or separately from a building supermarket
To separate the measured pipe sections from the bay, it is advisable to stock up with a pipe cutter designed for cutting metal-plastic pipes. Since plastic is a fairly malleable material, it can be cut with a hacksaw for metal or even with a sharp knife.
Nevertheless, the ideal perpendicularity of the lines, without which it is difficult to obtain a tight connection, can only be obtained using a special cutter.
Wrenches of various types are important for mounting and assembling threaded joints on pipe fittings. If absolutely necessary, you can do with one ring spanner, but for comfortable work it is better to use two ring spanners and one adjustable spanner.
Caliber is an important tool for creating an accurate and tight connection between the pipe and fitting: it allows you to center the cut plane and chamfer the inside of the product.
The pipe bender allows you to change the configuration of the element, so that you can save on corner fittings. It is especially important to have this tool if the design involves a large number of angular mates.
Before starting work, we advise you to familiarize yourself with the rules and specifics of crimping metal-plastic pipes.
What materials will be required?
To lay the pipeline, it is important to stock up on the following components:
- pipes (bays, measuring segments);
- various options for fittings (contours, tees, corners), with the help of which individual sections of pipes turn into a single system;
- fasteners - collapsible clamps and clips, with which metal-plastic structures are fixed on supporting surfaces, most often on the wall.
It is important to pre-select all the necessary materials and tools in order to then freely carry out all the work.
This article will familiarize you with the assortment of metal-plastic products for assembling pipelines.
Pipeline marking
Before starting work, it is important to consider how the pipes will be placed.
When developing a scheme, it is desirable:
- To put the pipeline lines directly on the walls of the room where it is planned to lay it, which contributes to the visualization of the structure.
- As a starting point, use the place where the pipe is connected to the tap or radiator, which must already be installed before installation.
- Minimize the number of tees and crosses affecting the stability of pressure, as well as minimize the number of other fittings.
- For corner laying of metal-plastic pipes, you can use a pipe bender or corner fittings.
- All the connecting element should be freely accessible, since the fasteners on the thread need to be periodically tightened to avoid leaks.
The installation of the connecting elements must be carried out after the completion of calculations and marking of the structure.
Overview of fittings for a metal-plastic system
To prepare for work, it is important to cut the pipes into sections of the required length, while all cuts must be performed strictly at right angles. If the pipe is deformed during the cutting process, it must be leveled with a caliber (it will also help to remove the inner chamfer).
To connect metal-plastic pipes of different categories into a single design, connecting elements are used - fittings that differ in design, size and fixing methods
For the installation of the structure, various types of fasteners are used - fittings, we will dwell on them separately.
Option # 1: collet
Collet fittings, consisting of a housing, a compression ring, a rubber gasket, have a detachable design, so they can be used several times. Carving parts allows you to combine them with household appliances.
To connect the connecting elements to the pipe, put on the nut and ring in series. Insert the resulting structure into the fitting, tighten the nut. To make the pipe easier to pass into the connecting element, it is desirable to moisten it.
Option # 2: compression
Widely used for connecting pipes parts that can be called conditionally split. Before installation, it is important to ensure that there are o-rings and dielectric gaskets that must be on the shank of the part.
Compression fittings are widely used in the construction of metal-plastic structures. They make it easy to create connections without the use of special tools.
To connect to the end of the pipe, a nut and a compression ring are put on (if it has the shape of a cone, the process is carried out from the narrower side of the part). After that, the shank is inserted into the pipe (for this you need to apply some force), while in order to seal the part is covered with tow, linen, sealant.
The next step is to attach and tighten the union nut to the fitting body. It is convenient to do this with two keys: one of them locks the part, the other tightens the nut.
This method is quite easy and does not require the use of special equipment, but it is undesirable to use it for hidden wiring, since it requires a connection check.
Image Gallery
Photo from
Compression fittings designed to connect plastic pipes are installed using a simple wrench. Special preparation for this is not required, it is enough to disassemble the connector into the components: union nut, split ring and fitting
Before installing compression fittings, we assemble the pipeline. In fact, we mark the place for installing the connector.
According to the markup we cut off the pipe. To make a perfectly perpendicular cut, align the previous 10 cm, only then cut at right angles
Before making the connection, we put on a corrugated thermal insulation on a pipe with cold water if there is less than 10 cm between the hot and cold branch (optional)
Calibrate the pipe scan. First of all, remove the chamfer on 1 mm with the calibration side. Then we round the pipe with the other side approximately to the risks
We put a union nut and a split ring on the pipe to be connected. We humidify the fitting by lowering it briefly into a container of water, after which we push the pipe onto the fitting so that it snug against the fitting edge
First, manually screw the union nut. It should be twisted without effort, if initially it went off-thread, it is better to unscrew and put it again. Reach out the nut using two wrenches: one hold the fitting body, the second we turn the nut 1-1.5 turns
After assembly, we start the system to check the quality of the connections. If necessary, tighten the union nuts if leaks are revealed
Step 1: Preparing Fittings for System Assembly
Step 2: Marking the Fitting Location
Step 3: Cutting the pipe to install the connector
Step 4: Installing a Thermal Insulation Corrugation
Step 5: Calibrate the Plastic Pipe
Step 6: Installing the union nut and seal
Step 7: Tighten the Flare Nut
Step 8: Quality Control of Connections after Assembly
Option # 3: push fittings
Convenient connecting elements, for the fastening of which special tools are not needed. For installation, it is enough to insert the product into the connecting part, while the end of the pipe should be visible in the inspection window.
Immediately upon completion of installation, thanks to the included water stream, the fitting wedge is pushed forward, forming a clamp that prevents leakage.
This method allows you to quickly and easily create the necessary design, ensuring high-quality durable joints. Almost the only drawback of push fittings is their high cost.
Option # 4: press fittings
These elements are used to create one-piece joints using press tongs or similar devices.
Press fittings create tight, durable joints, but they can only be used once. In addition, press pliers will be required to work with such items.
To connect using press fittings, you need to calibrate the part by removing the bezel from it, after which a sleeve is put on it and the fitting is inserted. The sleeve is captured by press pliers, after which, by moving the handle, the part is firmly clamped.
Such an element can be used only once, but the fasteners mounted with it are quite tight and reliable, making them suitable for hidden wiring.
Press fittings are installed in the following order:
Image Gallery
Photo from
Step 1: Cutting the plastic pipe to size
Step 2: Preparing the Fitting for Installation
Step 3: Manually Connect
Step 4: Crimp the clutch press pliers
Installation of pipes from different types of materials
To connect the elements, one of which is made of metal and the second of metal-plastic, special fittings are designed, one end of which is equipped with a thread, and the second - a bell.
For installation, the metal pipe must be threaded, wrapped with tow, greased with soap or silicone, and then hand threaded fitting. After its second end is connected to the plastic element, the thread is completely twisted with a wrench.
Assortment of fittings of various shapes
For ease of installation, the connecting elements can have a different shape. The most common are:
- adapters for connecting pipes with different diameters;
- tees providing branches from the central pipe;
- angles for changing the direction of flow;
- water sockets (adjusting knees);
- crosses allowing to organize various directions of a stream for 4 pipes.
A special configuration (couplings, triangles, tees) can have press fittings.
In the video below, plumbers will tell you how to correctly and quickly mount structures from plastic pipes:
Using the right methods and quality components allows you to create durable metal-plastic systems that will serve for a long time without leaks, repairs and unnecessary material waste.
You can talk about how you installed and connected metal-plastic pipes in the block located below. Please comment on the information provided by us. Ask questions, share useful information and thematic photos.