The type of sink and its location largely determine the convenience of cooking and the comfort of the entire kitchen. This is not only a functional subject, but also part of the design of the room. Therefore, the choice of a kitchen sink must be approached with all responsibility.
We will help you determine the optimal model and show you where it is better to place it. And also describe how to install a sink in the kitchen without the help of specialists. Installation technology is quite simple, the main thing is to adhere to the rules and requirements outlined in the article.
Types of kitchen sinks
One of the key aspects in the installation is the type of sink, which implies a certain design and mounting device:
- mortise - are installed in a specially prepared connector in the countertop, cut to the size of the sink;
- waybills - inexpensive and easy to install models are superimposed on a freestanding cabinet.
According to the type of arrangement relative to the countertop, kitchen sinks are divided into desktop, table and wall mounted.
The first is mounted below the level of the work surface. The latter are mounted on hinged brackets, rarely used due to low aesthetics.
Image Gallery
Photo from
Kitchen sink embedded in countertop
Laid on sink for the kitchen
Corner sink model
Round basin model
It is also worth paying attention to the material from which a particular model is made. The cost of the product and its appearance depend on this.
For the kitchen, practical stainless steel options are most often chosen, including chrome or nickel plated models.
Image Gallery
Photo from
Most of the sinks requested by the buyer are made from affordable metals. However, for elite interiors, both copper and brass models are produced.
Steel models are undoubtedly the leaders in sales, which is justified by light weight, durability, operational long-term durability and ease of installation
Enamelled steel products are still in high demand. It attracts a price whose advantages do not overshadow the relatively quickly appearing chips of the coating
Stylish and aristocratic look at kitchen sinks made of quirill. They can not be called durable, but still they are more reliable than glass
Not too previously demanded in the kitchens, earthenware sinks finally “burst” into the previously closed sphere for them thanks to the advent of dishwashers
The market has not yet been "captured", but managed to occupy a stable niche in ceramic containers, pleasing with a nice decor with folk motifs
Adherents of close ties with nature really like sinks made of natural wood made using ancient technologies for making troughs, barrels, and tubs
Sinks made of natural stone look very expensive and stylish. However, furniture under them should be thoroughly strengthened. Artificial stone sinks are much easier
Bestsellers - Steel Sinks
Enamelled black metal sink
Spectacular novelty from quirill
Classic Earthenware Capacity
Interesting model in folk style
Natural wood products
Natural and artificial stone
More expensive - sinks made of ceramics, porcelain stoneware, granite, glass.
Stone models - natural or artificial have a spectacular appearance. The first ones are very massive and it is difficult to install them yourself.
Composite shells have a granular structure that is very similar to polished stone. Such models are quite expensive and more fragile. If you drop something heavy in such a sink, a chip may appear.
A variety of models of sinks on the market allows you to choose the option of any configuration so that the cooking process is as convenient and ergonomic as possible.
Criteria for choosing a kitchen sink
It is worth paying attention to the following characteristics of the sinks:
- Functionality. Depends on the nature of the work in the kitchen. The number of bowls and wings for drying - additional compartments allow for several manipulations at the same time, which is very convenient for bulk cooking.
- Spaciousness.Depends on the daily amount of dishes to be washed.
- The combination with the interior. An acrylic white sink does not always fit harmoniously into the design of the kitchen, so it is important to choose a model that is suitable in texture so as not to violate the integrity of the kitchen space.
Modern models can be equipped with automatic valves for adjusting the drain, as well as bends for connecting dishwashers and washing machines.
Pay attention to the functionality of the sink. Think about whether you need additional features that modern plumbing offers.
If you will install the filter unit under the sink, then you can pay attention to the model with an additional hole for the second tap. Of course, it can also be done with a drill by drilling a through hole in the countertop.
Where better to install the sink
Before performing installation, you need to take into account a few simple rules that will make the operation process more ergonomic. It is customary to arrange the kitchen interior in a certain order to facilitate the work process: refrigerator, sink, dishwasher, stove and work surfaces located between them.
For convenience, the minimum distance between objects should be as follows:
- 40 cm between the stove and the refrigerator;
- 40 cm between the sink and the fridge / stove.
Do not install the sink near the hob. Water spray can extinguish a flame and cause a gas leak. Near the sink there must be a working area where you can cut, cut and clean products.
If you carry the same fruits and vegetables through several tables, then soon everything around will be splashed with drops of flowing water.
Choose the right place for installation. Consider the size and shape of the bowls, as well as the presence of an additional drying surface
Using a sink, the kitchen can be divided into two zones, for example, for dirty work and serving.
Installation of mortise sinks
The most important part of this installation method is not even the cut-out and its cut, but the quality of the joints between the sink and countertop. Of course, the niche should be as flat as possible and fit the size of the sink.
High-quality work will save you from the hassle in the future caused by the swelling of the countertops from excess moisture.
Remember that a properly completed installation will be the key to the reliability of your kitchen. Follow simple tips to avoid future troubles.
There is a direct correlation between the complexity of the installation process and the dimensions of the sink. The larger the dimensions of the bowl, work surface and additional departments, the more difficult it is to manipulate the sink during operation. But with a competent approach, using the advice of professionals, you can count on an excellent result.
The installation of a kitchen mortise sink consists of a number of traditional steps:
Image Gallery
Photo from
Stage 1: Choosing the optimal washing location
Stage 2: Marking the hole for the kitchen sink
Stage 3: Fixing the mixer with an inlet
Step 4: Attaching the sink to the hole
What will be needed in the process of work
Having chosen the optimal sink for the kitchen interior, you can proceed with installation. First you need to stock up with all the necessary tools.
During the installation you will need:
- sealant - preferably with a spray gun;
- electric drill;
- mounting knife, screwdriver and adjustable wrench;
- jigsaw;
- measuring instruments - pencil, ruler and tape measure.
In addition, you will need several 10-12 drills and a cardboard box.
Marking line
So, before us is a clean wooden tabletop, in which you need to cut a niche for the dimensions of the sink. We start with the markup, determining the center of the sink on the countertop. It is necessary to determine the lines of symmetry in order to expose the sink symmetrically to other pieces of furniture in the kitchen.
After that, we draw the outline of the product on the countertop itself. The circuit should have a perimeter that is comparable to the widest part of the sink, recessed under the countertop.
To create a contour, you can use a cardboard blank, which will serve as a pattern for drawing a contour on the countertop. This is the best option that will give high accuracy.
Use a cardboard blank to apply the most accurate contour to the base of the countertop. Draw with a regular pencil with a high softness of the rod
The cutout should be at least 5 cm from the front edge of the countertop and 2.5 cm from the back. These recommended values may vary in practice, but it is best to stick with them so that the kitchen does not lose its integrity and strength.
This washing arrangement is convenient and practical, as water splashes do not fly to the floor, and the back does not get tired while washing dishes.
How to carve a niche?
Next, you need to drill 4 through holes using a drill for the size of the jigsaw blade. The holes should be close to the cut line, but not extend beyond the perimeter. Now, along a line strictly marked with a pencil, cut a niche from the front of the countertop.
In the process of sawing, several self-tapping screws must be screwed into the resulting slot from different sides as they are cut. This will prevent the inside of the countertop from falling, which can damage the coating and form long nicks.
To enter the jigsaw we use drilled holes. After complete sawing, the cut mass will be held on self-tapping screws. You need to remove the screws in turn, holding the plate from the bottom. The slice must be freed from sawdust by sanding it with fine-grained sandpaper.
During the operation of the jigsaw, insert several screws that will not allow the sawn plate to fall. Do not use a jigsaw at maximum speed, otherwise the edges of the countertops may melt
Now you can make a test immersion of the sink in a niche. Please note that the sides of the product should be close enough to the walls of the cut. A slight backlash is allowed, as the sink should fit freely into the cutout.
Places that interfere with complete immersion should be filed with a jigsaw. You should also think in advance about how the liner to the mixer, siphon and the tap itself will be placed.
Phased installation of plumbing
First you need to install the complete mounts that serve to fix the product. A layer of sealant is applied to the edges of the countertop (to cut), which will protect the wooden surface from moisture and prevent the tree from swelling.
To do this, you can use a rubber spatula or smear the adhesive mass with a finger. Chipped on plastic (tabletop coating) around the saw are also smeared.
Use sealant to anoint the inside of the countertop. Please note that it can be well absorbed into the porous structure of the compressed board.
A set of sinks often comes with a foam polyethylene sealant, which is glued to the back of the sides of the sink.
If, after fixing, the sealant protrudes slightly beyond the sides, then it must be carefully cut with the sharp end of the mounting knife. If this is not done, then the protruding sealant will not allow the fixtures to press the sink well enough to the base.
After that, you need to degrease the surface of the countertop and sealing polyethylene. Use a rag soaked in acetone or gasoline. A sealant layer is applied with a continuous strip of sealant, but do not get too carried away with the thickness of the strip.
Plumbing manufacturers often put double-sided tape in the kit, which serves as an additional gasket between the two surfaces, increasing tightness. It is glued on the edges of the countertop, and a layer of sealant is applied on top of it.
In practice, they often do without a sealant. As a substitute, a sealant is used, which fills the entire space intended for foamed polyethylene.
Next, install the sink in the countertop, firmly pressing its edges. This will allow the sealant to fill all voids, creating a tight and sealed barrier.
Using a gasket is the most practical and effective method of sealing. When using it, it is possible to easily dismantle if necessary
But this method also has its drawbacks: the high consumption of sealant (increases the time of complete drying), as well as the extremely laborious process of dismantling in case of unsuccessful installation or the need to replace the sink in the future.
Leveling and fixing the sink
The sink is inserted into a niche and is aligned with the markup. Take a few fasteners (2-4 is enough) and at an equidistant distance from each other we begin to fix the sink, gradually tightening the screws.
In the process, we constantly monitor the position of the shell relative to the marking. Do not use a screwdriver so as not to break the plastic threads on the fasteners. After making sure that the sink has taken the correct position, we tighten the fastenings on the screws diagonally.
Use only a screwdriver to screw in the screws. So you can control the degree of tightening. With a screwdriver, you can not calculate the force and damage the plastic thread
So that the metal studs of the fasteners penetrate deeper into the surface of the countertop, you can pre-grind them using a file, and also lightly tap them with a hammer during the final tightening of the screws. As you tighten, the sink is pressed against the countertop.
Relative evidence that the sink is firmly pressed against the base can be extruded sealant. Its excess, as well as residual markings, are removed with a dry cloth.
The design must be left for a day until the adhesive has completely dried and crystallized. Only then can you start installing the mixer and connecting the sewer.
Installation of a freestanding sink
The overhead sink is mainly held on the pedestal using its own sides, which protrude beyond the base. These models also differ in the availability of space for drying, the number of bowls, size and shape.
Choose a sink wisely. Pay attention to the shape, size and functional "buns", such as the presence of several bowls and other bells and whistles. Based on the size of the available space for installation in your kitchen
Installing a sink of this type in the kitchen is much simpler compared to the previous method. The main difference is the lack of the need to make a cut, which is the most time-consuming part of the process. Several installation methods are used.
Mounting on glue. The overhead sink is installed on a special cabinet, which along the perimeter should be smaller than the sink. The sides of the shell should completely cover the edges of the cabinet. The ends of the substrates are treated with a sealant based on silicone or polypropylene.
After that, the product is placed on the pedestal and pressed tightly along all sides. After a few days, a completely sealed layer is created, which will not allow water to leak under the cabinet.
When the installation work is completed, you can start connecting to the sewer - installing a siphon.
Mounting on mounting brackets. In some cases, special fasteners are sold along with the sink. First, self-tapping screws are braided into the inner walls of the cabinet, on which the brackets are suspended. Then the screws are screwed onto ¾.After that, the sink is installed in the opening with mixing on the mounting bracket.
In the process of maneuvering, it is necessary to ensure that the sink is completely pressed against the curbstone, and the self-tapping screw is fixed in place of the deepening of the corner. Then the screws are screwed all the way.
Installation of a stand-alone sink is somewhat easier, because implies in its design the presence of special holes and brackets for fixing
Mounting on wooden blocks. This method is used when the previous two are not suitable, for example, due to a defect in the countertop or the lack of appropriate connectors on the sink. In this case, you will need 4 wooden bars and furniture corners. Using these materials, you can make an installation site.
The height of the bars is selected so that the sink is at the same level as the rest of the kitchen furniture. To the size of the cabinet, bars are cut and fastened from the outside with the help of furniture corners. A home-made design is installed on the pedestal and, with the corners with self-tapping screws, is screwed from the inside to the walls of the table.
In the last two ways you need to take care of tightness. To do this, apply a layer of sealant to the contact points of the cabinet / wooden platform with the sink.
Additional information on how to install a sink sink is presented in this article.
This video visualizes the installation process of the sink and helps to see some of the subtleties of the wizard.
Mounting mortise model:
Installation of a sink is a responsible task on which functionality of a working space and reliability depends. Improper installation can lead to rapid destruction of the countertops if water begins to penetrate the sink.
The main thing in the installation is the high-quality sealing of the joint between the sink and the ends of the kitchen furniture.
If you have experience installing a sink, please share this information with our readers. Leave comments on the article and ask questions. The feedback form is located below.