Breeding chickens is a troublesome thing, so you need to try to get the most out of it. Good performance of poultry, along with other activities, provides an extract in the chicken coop. Without clean air, the health of chickens is at risk, therefore, egg production is reduced.
We suggest that you familiarize yourself with the methods and options for ventilation in the house. We give regulatory requirements for the construction of indoor pavilions for domestic birds. Based on our recommendations, you can provide the hens with a regular supply of fresh air.
We supplemented the detailed description of ventilation organization technologies with intuitive diagrams, photo selections, a video presentation of a proven system and a video guide.
The role of ventilation in creating a house microclimate
In the chicken coop, as in any house, there are ammonia vapors dispersed throughout the room. If fresh air does not enter from the outside and harmful fumes reach a high concentration, its inhabitants begin to get sick, and in some cases this becomes the cause of death.
Feathered birds and heat are poorly tolerated, so a system that allows air to circulate is simply vital for them.
Without ventilation, it is difficult to control air humidity. Birds are equally ill both in an excessively wet and in a dry room.
During frosts it is impossible to let out hens on the street, and in the room without access to fresh air they begin to hurt. Effective ventilation solves the problem
This problem becomes especially relevant in the winter, when the entire population is constantly in a confined space. Carbon dioxide, water vapor, plus toxic ammonia from the litter build up in the air. Rotting litter and food scattered on it are a good basis for the propagation of harmful microorganisms.
Just opening the door is not an option. This way of providing fresh air can create another problem - frostbite ridges. Dangerous for layers and sudden changes in temperature, drafts. Therefore, the presence of a competent scheme of general ventilation in the chicken coop in the winter is a matter of extreme necessity.
Image Gallery
Photo from
An extract in the chicken house is needed not only to ensure favorable conditions for the birds. It is necessary to remove moisture that destroys building structures.
An extractor hood designed to exhaust exhaust air, vapors and condensate will ensure drying of the organic litter and wooden perches
Regardless of the type of ventilation system, the chicken coop needs to be equipped with devices for periodic ventilation of a room with a concentrated arrangement of birds
The windows in the chicken coops are arranged so that in the winter they can be opened, and in the summer they can be completely removed to ensure the outflow and air flow. The openings in this case are closed with a fine mesh
The winter chicken house enclosure needs the same efficient, well-organized ventilation as the main chicken house
The location of the exhaust and supply devices of the ventilation system in the house should be arranged so that even on the perched birds did not feel the movement of the air flow
According to the principle of inducing the movement of air masses, ventilation systems of houses are mechanical and natural. The choice of variety depends on the number of livestock
Lazas for chickens cannot be regarded as sufficient for ventilation and ventilation of the hole. They will not be able to provide sufficient removal of polluted air and the influx of a new portion instead.
Large Aviary House
Drying perches and litter
Ventilation window for supply and exhaust
Windows in the house ventilation system
Winter insulated chicken coop with aviary
Exhaust Height
Natural-draft small house
Openable manhole
Existing ventilation methods
There are 3 ways to ventilate a room where poultry is kept:
- natural;
- mechanical;
- combined.
The first is the most inexpensive and is used in the presence of a small number of chickens. It is a simple airing, but it must also be arranged according to certain rules. Before deciding to make such ventilation in the chicken coop with your own hands, you need to take into account all the points during the design of the bird house.
When arranging a chicken coop, it is important to do everything so that there are no drafts. They can also appear when the selected pipe diameters exceed the calculated values. Then there is a rarefaction of air, provoking this phenomenon
The second method of ventilation is more effective, but simple in implementation. If the farm has more than 20 birds, you should stop at this option.
Mechanical ventilation can be forced, exhaust or combined, i.e. supply and exhaust. She is satisfied in large farms. The feasibility of using a mechanical system in a domestic poultry house is determined by the size of the livestock - the room should be designed for hundreds or more chickens.
In a combined mechanical system, either the exhaust air mass is removed naturally, and fresh air is pumped out mechanically, or vice versa.
Image Gallery
Photo from
Natural option for house ventilation
Ventilated to stimulate movement
Exhaust pipe with fan
Hood without fan in a brick wall
Standard methods of organization and types of ventilation are described here. We invite you to familiarize yourself with the principle of operation of typical options and the general rules for the construction of systems.
Four basic system requirements
The ventilation system of the chicken coop will work effectively only if the basic requirements for this room are met:
- Constant supply of clean air to the house.
- No drafts, as the inhabitants of the chicken coop are very sensitive to them.
In addition, to eliminate the instantaneous air pollution coming to replace the allotted exhaust hood of the dirty air mass, it is necessary:
- Regular removal of litter, spoiled feed and dirty water.
- The periodic destruction of small rodents. Besides the fact that their presence disturbs the birds, they also serve as a source of additional air pollution.
To make sure that the ventilation is completed and functioning correctly, go into the chicken coop and stay there for a while. If you do not feel a lack of air and your head does not begin to hurt, then the test is passed. Otherwise, you will have to fix something.
Variants of a chicken coop ventilation device
When arranging the ventilation of a home chicken coop, you can completely do it yourself.
It is important to do everything correctly to ensure comfortable conditions:
- The temperature in the cold season is not lower than 16⁰ for adults and 28⁰ for chickens.
- Humidity from 60 to 80%.
- The air flow rate is 0.8 m / s maximum in summer and not more than 0.5 m / s in winter. If these indicators are exceeded, drafts will walk indoors.
The ventilation scheme in the chicken coop and in other buildings is built on the same principle. They come from the area of the premises and the number of birds. When determining the performance of the system, they take the following moment as the basis: for each m² of area there should be 5 hens.
Choosing the type of ventilation for your chicken coop, you should proceed from its size and the number of birds contained in it
To solve the problem of ventilation, you need to decide on its type. The next step is to draw up a detailed diagram, then purchase materials. All that remains is to follow the technology and carry out the necessary work.
Organization of natural air exchange
It is based on the parameters of the air: temperature, pressure, wind speed. This type of ventilation can be either unregulated or organized. Unorganized ventilation occurs through leaking doors and windows; air infiltration occurs through walls and ceilings.
For organized air circulation (aeration), you need to provide a small window, placing it in the ceiling above the perch or directly above the doorway. To control traction, the window is made in the form of a window.
In the simplest version of the house’s natural ventilation, fresh air enters through the open door, exhaust air leaves through the window
The door in the open state will supply the house with fresh air, and the exhaust will go through the window. This method is good for the warm season. In winter, the effect of such ventilation is negligible. It is unprofitable, because it takes a lot of heat. You will have to spend a lot of money on maintaining the optimal temperature inside the house.
The most primitive circulating or open system, suitable for a room of about 9 m², consists of 2 sewer or ventilation plastic pipes 2 meters long, 200 mm cross-section and a 90⁰ elbow. One of the pipes will act as a hood. It is mounted above the perch at the ceiling level or slightly lower.
It should rise 1-15 m above the roof. To do this, make a hole of the appropriate size, insert the pipe and elbow, blow the cracks into the mounting foam.
On the opposite side, the second pipe is installed in the same way, placing it 0.5 m below the level of the first, 20-25 centimeters should remain to the floor. In order not to provoke drafts, the supply pipe is located away from the perch.
Installation, taking into account regulatory requirements, involves the exit of the opposite end of the pipe 0.3 m beyond the roof.
Be sure to install dampers on the pipes. To prevent dust and precipitation from entering the room through the pipes, their ends are made L-shaped or umbrellas are installed. You can purchase and install special nozzles - baffles. Under the influence of wind, they increase the rarefaction of air in the pipe. The outside of the pipes is plastered and painted. This will insure against the formation of cracks in the future.
The scheme of supply and exhaust ventilation indicating all the parameters. There must be a window in the chicken coop. Ideal when it faces east and the door west
The most effective air circulation is provided by pipes with a circle in cross section. It is better to insulate plastic and metal products, otherwise in winter condensation will appear on the inner walls. When freezing, after some time it can block the ventilation passage completely.
To securely fix the plastic ducts, they are installed near the rafters, in some cases, additionally fixed with brackets. Sometimes instead of pipes arrange channels from the boards. In this case, special attention should be paid to their sealing.
At very low temperatures, the air damper shuts off and, if not installed, protects the openings from the wind flow with a rag. In summer, the air ducts open completely.
There is another simple ventilation method for a small chicken coop:
- A box is constructed from the boards, having a cut square of 200 x 200 mm. Install the structure vertically.
- Divide the inside of the channel in half.
- Close the top of the box.
- Seal and paint the outer surface of the channel.
- Drill holes in the sidewalls.
The part of the channel located on the leeward side will provide air supply to the chicken coop. Exhaust air will escape through the second half of the duct.
If the chicken coop area is large, more solid ventilation is used in it, acting according to the supply and exhaust principle. For this, preliminary miscalculations are performed and an individual project is created. It is important to choose the right cross-section of the pipes so that the air flows do not create drafts.
For ventilation pipes, ready-made check valves can be purchased both round and rectangular in cross-section. Their design includes a housing of the corresponding section and a damper. Round valves are made of galvanized sheet metal, and rectangular valves are made of aluminum sheet.
The non-return valve will prevent frosty air from entering the chicken coop when ventilation is inoperative. Its main element is a flap that opens only in one direction.
Valves with a damper, the position of which is manually adjusted, are marked with the letter P. If the model is controlled by an electric or pneumatic actuator, then the letter E or P is present in the designation, respectively. You can use a standard round valve with a pipe diameter of 250 mm. The feasibility of their use is determined by the scale of the house.
Mechanical system
The task of mechanical drawing is to provide an optimal mode regardless of the weather. In a small-scale economy, its use does not always justify the costs associated with paying for electricity. It is not possible to recoup costs if chickens are raised only for the needs of the family.
In the room where the bird is kept, complete replacement of air should occur in 60 minutes. The blower fan is installed inside the duct and must be protected with a metal mesh with small cells
This type of ventilation is similar to the supply and exhaust method, but here a somewhat improved technology is used, which consists in the use of fans. In some cases, the system is controlled in manual mode, in others there are special control panels.
The mechanical ventilation scheme for use in winter contains two pipes and a duct fan, the location of which depends on the type of circulation. To ensure supply ventilation it is placed in the supply pipe. With an efficient exhaust device, the fan must be in the exhaust pipe.
The installation process is almost the same as with the supply and exhaust ventilation device:
- Install 2 pipes.
- Drill holes for condensate at the end of the chimney.
- Lay the wiring to the fan installation site.
- Mount the switch. There can be 2 options: a switch that turns on both the light and the hood, or a 2-key view of the switch that allows you to control the lighting and the hood separately.
- Install a fan.
In a simplified version of the mechanical retraction, the household axial fan is located in the wall on the ceiling or in the window window. The last option is the easiest. They try on a fan, cut a rectangle of OSB or plywood to fit the glass.
Mechanical ventilation smooths out temperature fluctuations. Fans place at the ends of the room designed for hoods at one end of the chicken coop, and inlets at the opposite
Mark up and cut out the opening for the fan, then insert the element into the frame and fix it with screws. The fan itself is inserted into the resulting hole. The method of securing the latter depends on its design.
A household axial fan, which is installed in the hood in bathrooms and bathrooms, is perfect for a large house. It is capable of processing large volumes of air mass.
The fan included in the system is connected to the electric network. Wiring is better to lay outside the chicken coop, because inside for this condition is not quite suitable. It is important to carefully insulate the wiring.
Such ventilation is not necessary to leave in working condition for a long time. It can work only 2-3 hours a day and this will be enough for effective ventilation.
For ease of control, sensors are installed. At a certain humidity and temperature, they turn ventilation on and off. Sometimes the pipes are placed in the attic, and the fan is in the ceiling.
Manufacturing a vent for a vent riser
Install it on a ventilation riser towering above the roof. The deflector works as follows: it cuts the wind directed in its direction, which leads to a decrease in pressure inside the device and increased traction in the exhaust duct.
Independent manufacture of a wind turbine will cost inexpensively, and the effect is impressive. Install it on the roof. Before proceeding to its manufacture, it is necessary to calculate the dimensions.
To calculate the height, the diameter of the ventilation pipe is multiplied by 1.7. Multiplying the diameter by 1.8, you get the width of the cap, and when you multiply this parameter by 1.3, you find out the necessary width of the diffuser.
The diagram shows typical structural components and standard proportions of the diffuser: pipe diameter (d), diffuser diameter (d1), cap circumference (d2), height (H)
Having calculated the sizes, they are applied to cardboard and patterns are cut out. Further, the development of the cap, the sketches of the workpieces of the diffuser, cylinder and racks are transferred to a metal sheet or plastic. Using scissors, cut out all the details and connect them using a special gun. It remains to install and fix the deflector.
You can also make a rotary valve yourself. For this, a frame is welded from the corners. On opposite sides of the frame, holes are drilled and an axis is threaded through them. Sleeves are made from pipe segments, welded.
A steel plate is made of a locking plate according to the size of the pipe. It is inserted into the frame, fixed to the axis by welding. To control the shutter, a wooden handle is fixed on the axis. To ensure that the shutter does not close spontaneously, a limiter is provided.
The disadvantage of such a ventilation system is the fact of the presence of pipes in the room. From their surface, as well as from a perch, it will be necessary to periodically scrape off the litter.
Presentation of a home-made ventilation system in the house with a visual demonstration of the design:
Together with the author of the video, you can do the ventilation in the chicken house yourself:
Any business can be mastered if you carefully follow the instructions. Do the hood in your own chicken house with your own hands and your birds will feel much better.
Want to talk about how to build ventilation in your own chicken coop? Do you know the nuances of its device that are not mentioned in the article? Please write comments in the block below, ask questions on controversial and obscure points.