The organization of effective ventilation in the house is not a whim of the owner, but a necessity dictated by sanitary standards. For the installation of such a system, plastic ventilation pipes for hoods are increasingly being chosen as the simplest, most productive and relatively inexpensive option.
Our article is devoted to the arrangement of air ducts from plastic ventilation parts. We will tell you how to choose the components for assembling the system and how to assemble it flawlessly. Here you will find out what devices should be equipped with ventilation for stable operation.
Advantages and types of plastic pipes
These lightweight products, in addition to ease of installation, have a host of other advantages: environmental friendliness, resistance to the negative effects of ultraviolet radiation, durability, low specific gravity, high resistance to aggressive environments, large size range and relatively low cost.
The disadvantage is the low temperature stability threshold, which does not allow their use in industrial conditions. For a private home, they are perfect.
Image Gallery
Photo from
Plastic ventilation pipes - now the most popular option used in the organization of exhaust ventilation at various facilities
For the assembly and installation of the ventilation system produce a wide range of elements that allows you to organize ventilation of any level of complexity
Components for the organization of the ventilation system are made of reinforced plastic. The material is durable, resistant to chemical and biological aggression
Plastic pipes are in excellent contact with all types of building materials and finishes, do not harm wooden furniture, products and structures made of chipboard, OSB, GVL, etc.
Plastic products for the construction of ventilation systems are produced for the arrangement of private, public and industrial buildings
According to the cross-sectional shape, the plastic ventilation pipes are divided into round and rectangular. In round aerodynamic drag less, rectangular look better
According to the invoice indicators, ventilation pipes are divided into rigid and flexible. Flexible corrugated duct is easier and faster to build. In addition, the corrugation makes it easy to turn without loss in cross section
With lightweight plastic pipes, ventilation is easier and easier, you can assemble it yourself without any problems
Plastic duct for hoods in the kitchen
Assortment of parts for assembling the system
Tee for ventilation from plastic pipes
Compatible with building materials and furniture
Duct from polymer pipes in a private house
Rectangular duct
Corrugated pipe ventilation duct
DIY hood assembly
In the construction market there are products of different lengths and diameters. There is a length limit for a PVC pipe - 3 m minimum and 12 m maximum. Their diameter ranges from 1.6 to 160 cm. For a cottage, the optimum cross-section of the exhaust pipe is 15 x 15 cm.
Of no small importance is the fact that the inner surface of PVC pipes is treated with an antistatic agent, because of which almost no dust settles in them, which prolongs the frequency of maintenance of air ducts.
According to the type of section, 2 types of pipes from plastic are distinguished:
- round;
- rectangular.
Corrugated varieties also belong to round pipes, with the help of which turns of air ducts are conveniently, quickly and efficiently performed.
Plastic pipe fits perfectly into any interior. It can be adapted to the features of the building, giving it the necessary shape.
From the point of view of aesthetics, a rectangular section is preferable, but when the room has a small area, a pipe with a circular section is more suitable, because in this case there are no protruding parts.
The marking on the square pipe makes it possible to navigate with respect to the correspondence of the rectangular section to a similar circular air channel.
In a country house with gas heating, the combustion products of the boiler are removed through a chimney that exits through the roof. The main enemy of the design is condensate, which appears when the temperature drops in the autumn-winter period.
He does not destroy the pipe itself from plastic. However, moisture flowing along its walls can cause significant harm to the building, so the plastic duct at the outlet must be insulated.
Plastic pipes are contraindicated for hoods arranged in baths and saunas, for chimneys and fireplaces, solid fuel boilers. If you still use them in these places, then you need to lay pipes from this material only from the outside. In this case, they will have to be well insulated from the cold.
Details about the choice of pipes for hoods made of polymeric materials are described in our article.
Hard polymer products
Choosing a plastic pipe for the installation of the hood, you do not have to worry about the harmful effects of corrosion and internal cleaning of the ventilation system. Passing through a smooth surface, the air stream does not meet obstacles in its path and does not create a lot of noise. So that the duct does not stand out against the background of the wall, a PVC pipe for the hood in the kitchen is laid over the cabinets.
Image Gallery
Photo from
Cutting a plastic pipe in size
Cold welding polymer duct
Installing a wall ventilation valve
Ceiling baseboard for masking pipes
In a pipe with a smooth inner surface there are no stepped bulges and relief drops that accumulate fatty deposits and dirt. This greatly facilitates the maintenance of the exhaust structure. At installation use L-shaped adapters, sealant.
Corrugated Flexible Options
It is possible to lay a corrugated plastic pipe for drawing in places where other pipes cannot be used. Due to its exceptional ductility, it can be bent as conditions require. If access to the ventilation shaft is at a certain distance from the stove, then the use of a corrugated duct is the most rational solution.
Corrugated plastic pipe for drawing is not used as often as smooth. Preference is given to its analogue of metal
Neither welding equipment, nor a large number of connecting elements, nor special supporting structures are required for their installation. Cons are the same as for flat pipes made of plastic - complete unsuitability in high temperature conditions. Add to the list of disadvantages can be increased noise during the operation of the exhaust system.
There are several types of corrugated pipes, but for the exhaust device, they are most often used:
- Single-layer, with increased flexibility and low weight.
- Two-layer, with high strength characteristics. They are also mechanically and chemically stable.
They are made from the same raw materials as other types of plastic pipes. Products have recesses on their surface located at the same interval from each other. Corrugated 2-layer polypropylene pipes have a smooth inner surface and a diameter of 16 to 63 cm.
Image Gallery
Photo from
Plastic corrugation for hoods
Concealed corrugated pipe installation
Open corrugated pipe
Transparent flexible duct
For their manufacture, manufacturers use a screw extrusion method with the formation of a corrugation along the entire outer surface. In places of depressions, a layer inside the pipe is welded.
The strength of the corrugated pipe is several times higher than that of smooth pipes. corrugated elements are produced for the construction of hoods with varying degrees of stiffness. This parameter depends on the presence of thickening on individual rings.
Material Overview
The assortment of pipes, both flexible and rigid, is very large, it is not difficult to work with them, so consumers appreciated them. They confidently displace steel analogues from the sphere of private construction.
For their production, polymers such as polypropylene (PN), polyvinyl chloride (PVC), polyurethane (PUF), fluoroplast (PVDF) are used. PVC pipes are in greatest demand.
PVC pipe analysis
This inert polymer has sufficient rigidity. Its elasticity is increased by introducing plasticizers into the composition. The glass transition temperature is rather high - 75 ° C.
Under normal conditions, the decomposition of the material takes decades, but at a temperature of 160 to 180 ° C it begins to decompose very quickly. Because of this, it cannot be used for ventilation in rooms such as saunas, where the temperature of the steam sometimes reaches 200⁰.
A rectangular PVC pipe is connected through adapters. When air passes through it, it remains stationary, so the hood is almost noisy
When the material breaks down, carbon monoxide (CO) is released, the inhalation of which is accompanied by suffocation, hydrogen chloride (HCl), which forms hydrochloric acid in an environment with high humidity - an invisible liquid that claims to have a pungent odor.
The compound has a very negative effect on health, in particular, on the state of the respiratory tract. In difficult cases, vision may deteriorate sharply.
From this we can conclude: PVC pipe is perfect for kitchen hoods, but only in those places if the temperature threshold does not exceed + 120⁰С. Negative temperatures are also contraindicated for these pipes.
Polypropylene Ventilation Pipes
Polypropylene is a resistant polymer, the hardest of plastics and easy to transform. Its softening occurs at 140 ° C. It poorly withstands polypropylene negative temperatures - it immediately becomes brittle, brittle, therefore it is suitable only for internal use.
For the hood, take polypropylene pipes with the designation PN10. This type is characterized by such dimensions as the outer diameter - 2-11 cm, wall thickness - 0.19-1 cm.
Polypropylene is a safe, reliable and simply ideal material for molding. In the photo, ventilation pipes and plastic ventilation elements
Pipes made of polypropylene are single-layer and multi-layer.
The first include products marked:
- PPH - made of homo propylene;
- RRV - the material for the manufacture is a block copolymer of polypropylene;
- PPR — made from a random copolymer of polypropylene;
- PPs - a flame-retardant material is used in the manufacture.
Multilayer pipes are reinforced with foil and fiberglass. They have increased rigidity and a small coefficient of thermal expansion. Polypropylene products are less durable than PVC, therefore they have thicker walls and their cost is higher.
Polyurethane ventilation pipes
The characteristics of polyurethane pipes are very similar to those of PVC pipes. They are plastic and durable, they can be given any shape.
The main difference is the ability to remain unchanged until a temperature of 280 ° C is reached. When this threshold is exceeded, polyurethane becomes very hazardous to health because it releases nitrogen compounds.
On a polyurethane pipe, even under the influence of high stresses, cracks will not appear. It can be bent as you like, but as soon as the load disappears, the original shape of the product returns
They are used in areas with complex trajectories, many turns and shifts. Somewhat reduces the aerodynamic characteristics of these pipes, the presence of roughness on their inner surface. The cost of such pipes is quite high.
Characterization of fluoroplastic pipes
Pipes from this material have high strength characteristics. Well proven in the temperature range from -40 dl to + 140 ° C. Fluorine plastic is recognized as the most slippery polymer, this fact is even recorded in the Guinness book.
Ftoroplastovy pipes are extremely resistant even in comparison with noble metals. This material does not lose its characteristics under extreme conditions.
They are resistant to aggressive alkaline and acid fumes, therefore, are indispensable for exhaust systems in chemical industrial enterprises. The diameter of the product ranges from 15 to 60 cm.
Due to their high cost, it is irrational to use them in the private sector. Also a limitation on their use is their increased gas permeability.
Plastic ventilation from sewer pipes
Experts often argue whether it is possible to make a plastic hood from sewer pipes. Opponents of this idea give such an argument as the absence of an antistatic coating in these products, as a result of which their inner surface is not immune to dust and dirt. Supporters say the problem will be resolved if this procedure is carried out independently.
The material for the manufacture of plastic sewer pipes is the same type of plastic except that its quality is somewhat lower. They are cheaper, so many use them for hoods
The indisputable advantage of pipes for sewage devices is that their price compared to plastic ducts is lower than 3 times. The disadvantages of these pipes and special ventilation products are common - loss of stiffness at high temperatures.
When using pipes designed for the construction of sewage systems as a supply air duct, the smell characteristic of plastic is sometimes felt, but after a while it disappears. Pipes differ and are somewhat larger than those of air ducts. For them, it is necessary to provide for mounting.
Image Gallery
Photo from
Stage 1: Outflow of plastic ventilation
Stage 2: Drilling holes for fixing brackets
Stage 3: Installing the bracket in the dowel
Stage 4: Exhaust duct complete assembly
The device of the polymer duct
When installing the duct, it is important to observe several rules:
- The length of the pipe should not exceed 3 m, otherwise the efficiency of the device will decrease.
- The diameter of the hole through which the pipe is connected to the ventilation shaft cannot be larger than the diameter of the pipe.
- Do not bend the pipe more than 90⁰. This will disrupt the normal flow of air.
4. Special valves must be used to prevent back draft. - An adapter must be installed at the transition point from the hood to the ventilation shaft.
This option is not recommended for implementation when the stove and the hood above it are on the side opposite to the exit to the ventilation shaft. At the same time, the length of the pipes and the number of turns will increase significantly, which will reduce the efficiency of the hood to a minimum.
An important parameter in the exhaust device is the diameter of the pipe. If it turns out that it is smaller than the size of the outlet, the load on the engine of the hood itself will increase, the noise level will increase to an uncomfortable perception. This will be followed by breakdowns, additional repair costs.
When extracting, sometimes a combination of plastic and metal pipes is used. To connect them using special adapters
Ducts are always trying to hide. For this purpose, decorative boxes are mounted, the structure is built into the furniture. An acceptable option is to install the pipeline over a suspended ceiling. The main thing is not to violate any of the safety rules.
To connect to the equipment, a piece of metal pipe with a diameter of 160 mm is used. From this element, bends from plastic pipes are performed. Enhances system efficiency by installing suction or blowers
If necessary, connect pipes having different sections, use bends, special connectors, adapters. The inner surface of these elements must correspond to the external parameters of the duct. The pipe segment is inserted into the connector and ensure tightness by applying the appropriate sealant.
There is a socket-type mounting connection. It is used when joining pipes of different sections. A smaller pipe is inserted into the wider end of the pipe. Fixation takes place using a thread or a special rubber seal.
We will analyze the standard assembly sequence for the exhaust duct from plastic pipes:
Image Gallery
Photo from
To assemble a plastic exhaust duct, we acquire parts and assemble the corner parts of the system on the floor, where it is more convenient and safer
We put a check valve on the exhaust vent. Fasten it to the screws with dowels through the body
We check the operation of the check valve, for which we use a regular hair dryer. When a pressure appears, its sash should open and let air into the ventilation; in the absence of pressure, the valve should be closed
We attach the finished corner turns to the installation site and note in fact the length of the straight sections, taking into account the inlet for connecting the pipes
We begin the assembly of the ventilation system from the hood. We connect a corner shaped element to it, to which we connect the pipe
Connecting the pipes in series, we bring the ventilation channel to the exhaust outlet. We set the corner segment and connect it to the exhaust pipe
We connect the kitchen hood, for which they arranged an exhaust duct, to the power supply. Check with a piece of paper connection. If the sheet is rejected in the area of seams and joints, then there is a leak, it will be necessary to eliminate the defect
After making sure that the air duct works flawlessly or eliminating the shortcomings, we start operating the system
Step 1: Assembling the plastic duct assembly
Step 2: Install the check valve on the hood
Step 3: Checking the Check Valve
Step 4: Cutting straight sections of plastic ventilation
Step 5: Connect the ventilation duct to the hood
Step 6: Connect the corner portion to the exhaust port
Step 7: Connect the hood to the power supply
Step 8: putting the system into operation
The role of the check valve in the system
The presence of check valves in the system will prevent air from entering the room from the ventilation duct. To prevent claps, it is necessary to install the valve axis perpendicular to the floor. The valve can only open when the hood is working.
Among the variety of such products, 3 types of valves are most often chosen:
- Reverse Petal. This is a series of blinds oriented inoperative vertically or horizontally. They open when the forced hood is turned on. Usually, walls with inlets are chosen for their installation.
- Turning. This is a simple mechanism that controls the intensity of the flow or completely blocks it. It is made in the form of a block with a valve located on the axis and controlled by a system of counterweights and rods manually or using automation.
- Bivalve "butterfly". In the body of this product is an axis on which there are two shutters. When the fan is on, the dampers open; when it is turned off, they take their original position.
Often, by connecting the exhaust structure to the ventilation passage, completely block the paths of clean outside air into the building. Then, with an inoperative hood, the room is completely not ventilated.
To prevent this from happening, a special grille must be installed on the opening of the ventilation shaft. In the upper part of it there is a pipe for connecting the exhaust pipe and at the bottom there are holes through which air flows naturally.
In the photo the check valve. It works well in the presence of an exhaust fan and without it. It blocks the flow of air from the outside
Plastic ventilation pipes for the hood for both the gas column and the stove sometimes go on sale complete with the hood itself. The components of such a system are selected by color and texture, so you won’t have to think about how to mask or refine the pipes.
Video # 1. Well-designed version of the kitchen hood:
Video # 2. Here is all about installing plastic ducts with a rectangle in cross section:
Video # 3. On the advantages of plastic ducts and their installation:
The best type of pipe for retraction is plastic round long products. The rectangular profile, although it looks more aesthetically pleasing, but it provokes increased resistance in the ventilation system, leading to equipment overload.
Please write comments in the block below. Express your own opinion, share your impressions about the information we have proposed. Perhaps you yourself assembled a plastic duct? Tell us about it, post a photo of the process. Report new ventilation duct options.